radio faceplate wanted
Posted: Mon Aug 12, 2013 2:09 pm
Hi All,
chasing a faceplate for this little beauty;
it doesn't fit the average size plate unfortunately, measurements are shown in the pic, the hole would have to be slightly larger at about 91 or 92mm by 40 or 41,
post to post from centre to centre is 130mm, this is for a bay so the plate has to be longer than usual too about 194mm long....
let me know if you can help,
cheers,
cam.
chasing a faceplate for this little beauty;
it doesn't fit the average size plate unfortunately, measurements are shown in the pic, the hole would have to be slightly larger at about 91 or 92mm by 40 or 41,
post to post from centre to centre is 130mm, this is for a bay so the plate has to be longer than usual too about 194mm long....
let me know if you can help,
cheers,
cam.