60s BEETLE BITS - WANTED
Posted: Tue Mar 31, 2020 11:49 am
Budget Pandemic Build ... looking for a few parts to make this car complete and then saleable....
Ratty and second hand are fine - the cheaper and cheery the better... but I don't expect shit for free
Pickup in greater melburg to save costs
Rear 1/4 glass (ideally with useable trims/rubbers)
Front Windscreen (ideally with useable trims/rubbers)
Driver side door glass with base channel
Driver Door upright rail for door card to hook onto (with 10mm bolt)
1 Headlight to body screw
4 taillight lense to housing screws
2 front indicator screws
4 Glovebox hinge screws
Tan/Brown Carpet 2nd hand
Driver Seat to match the one pictured - same colour and condition (or better)
Front Door cards to match the rears pictured
Starter Motor (putting a 1500 into 6v gearbox so 12v with a bushing?
MUCH APPRECATED .... IN ADVANCE
Ratty and second hand are fine - the cheaper and cheery the better... but I don't expect shit for free
Pickup in greater melburg to save costs
Rear 1/4 glass (ideally with useable trims/rubbers)
Front Windscreen (ideally with useable trims/rubbers)
Driver side door glass with base channel
Driver Door upright rail for door card to hook onto (with 10mm bolt)
1 Headlight to body screw
4 taillight lense to housing screws
2 front indicator screws
4 Glovebox hinge screws
Tan/Brown Carpet 2nd hand
Driver Seat to match the one pictured - same colour and condition (or better)
Front Door cards to match the rears pictured
Starter Motor (putting a 1500 into 6v gearbox so 12v with a bushing?
MUCH APPRECATED .... IN ADVANCE
