Melburg Luft

Can anyone help me out. Local steel suppliers only stock upto 50mm. Need approx 200mm of 2.5 inch OD pipe. Any thinkness.

If anyone can help, would be very appreciative.

Thanks, Josh

i don't have, but try any performance exhaust shop

Hey Josh,

I took all my scrap bins in the other day after being made redundant. Gotta eat somehow.....

Try Martin's Steel in Kerang, I know it's a long shot, but they have always had odd sizes. Don't panic about the distance, I can get it here every second weekend or so.

Rural suppliers often have NOS laying about.

If you get stuck, I have a little bit of 60.55mm/2.384" OD with 5mm wall.

It is a homemade jib extension to my w/s floor crane, so it sort of has a use, but I never use the extension anyway..... It is a bit ratty too.

If you get uber desperate, let me know and we'll have 8 inches off that jib extension........

Not after exhaust pipe. Should have been more clear

After like 3mm or something. Structural steel.

i'll check at work 2 moro may have something

martinigreenbus wrote:Hey Josh,

I took all my scrap bins in the other day after being made redundant. Gotta eat somehow.....

Try Martin's Steel in Kerang, I know it's a long shot, but they have always had odd sizes. Don't panic about the distance, I can get it here every second weekend or so.

Rural suppliers often have NOS laying about.

If you get stuck, I have a little bit of 60.55mm/2.384" OD with 5mm wall.

It is a homemade jib extension to my w/s floor crane, so it sort of has a use, but I never use the extension anyway..... It is a bit ratty too.

If you get uber desperate, let me know and we'll have 8 inches off that jib extension........

Cant have you chopping your tools up Brent, but thanks for the offer. The size I need is exactly 2.5 inches. Must be a close fit, as its for a sleeve for my rear torsion tubes.

I'll have a bit more of a look around, and call the ranch, next best bet.... car load of hoons coming down from the 'Hill to watch the gp, so if either the farm or martin's have some, you'll have it by sunday.....

MAte you are a champ. Im gonna keep trying tommorow on the off chance some one has some, but I appreciate you having a look too. Cheers mate.

on the off chance
ring pirate

0408 178 211

I'll see what I can chase up tomorrow

Let u know if you find something Rhett.
I may be doing a mad dash down to melburg tomorrow night I could drop it off for the young fella
Cheers

No dramas

Lufters are the best people on earth.

Aaaaawwww shucks SMB!

Josh, Handy Steel SUpplies in Heidelburg/ivanhoe. Thats where i got my tubing for the beam. the flare at the bottom of a ball joint beam. 50.5mm ID and 61mm OD, so that may do, but if not they may have something. I will be home most of the day tomorrow, so if your in the inner western burbs doing work, call me, and maybe bring the part you need to sleeve, to see if it will work.

Nectar.

Sorry dude, in Tooronga all day. Will see how we go with the other leads, but thanks for the tip off. If I need to go down that path then thats what I'll have to do.

SOrted. Thanks all for your help. DAN you were spot on. Performance exhaust in Ringwood. 63mm outer dia, 3 mm side wall. Perfect fit

AND no charge!

Thanks for the tip off.

If anyone is considering narrowing their rear, this is where to go.

OK, great news....... I am waiting for a call back tonight, but now no need to worry......

Super news.... Looking forward to seeing what it is all about

hertz wrote:SOrted. Thanks all for your help. DAN you were spot on. Performance exhaust in Ringwood. 63mm outer dia, 3 mm side wall. Perfect fit

AND no charge!

Thanks for the tip off.

If anyone is considering narrowing their rear, this is where to go.

Or you could go to the gym....