wanted 6V 1200
Posted: Sun Nov 22, 2009 10:36 am
need a good running 6V 1200 motor for the 58 anyone got a spare?
Colin
54734119 or PM
Colin
54734119 or PM
Page 1 of 1
Posted: Fri Nov 27, 2009 1:32 pm
Yeah just picked up a car today with a 1200 aparently is a good goer i will put in a battery tonight and see if this is correct
Posted: Sun Nov 29, 2009 11:47 am
checked it out it runs but is very noisey sorry bout that
Posted: Sun Nov 29, 2009 1:36 pm
no worrys thanks
Posted: Fri Dec 04, 2009 8:30 pm
40hp non freshair motor available at imported
was gonna put it in my oval till I found a 36er
call 9547 2169 if you want it.... 9-5 mon-fri or 9-2ish sat
was a running motor when pulled from the car...
was gonna put it in my oval till I found a 36er
call 9547 2169 if you want it.... 9-5 mon-fri or 9-2ish sat
was a running motor when pulled from the car...
Posted: Fri Dec 04, 2009 10:56 pm
still running 6V?
Posted: Fri Dec 04, 2009 11:21 pm
it says 12v in the other thread Col, let it go to scrap for the $8.70, cause that's what it's worth.......
Posted: Sun Dec 06, 2009 11:33 pm
maaaan your not looking hard enough.. scope ebay, i just picked up an early 6v engine that would run, a 40hp in bits and a 1600sp and a three rib box for a price i wont even mention 
all within an hours drive of your digs, i was gunna pop in but i didn't have your number.. bugger.
I was gunna offer you the engine, but its a bit different so i wanna find out about it now..
Anyway if i find anything i'll let you know, 6v 1500's alright?
all within an hours drive of your digs, i was gunna pop in but i didn't have your number.. bugger.
I was gunna offer you the engine, but its a bit different so i wanna find out about it now..
Anyway if i find anything i'll let you know, 6v 1500's alright?
Posted: Mon Dec 07, 2009 12:24 am
sorry for the hijack
all the stuff above is bastard 40hp (60? kombi only) stuff. i'd love the bastard fuel pump if you don't want it. i picked up a rebuilt engine years ago with some bastard bits and it took years (pre net) to find out what they came from. eventually i'd love to collect enough bits to build a hotted up bastard look alike engine. if it will ever happen i don't know, but it is a fun pipe dream.
please post some pics or start a thread.
??? i'll take a punt and say that the rocker covers step down about 15mm at the intake manifold. it has raised humps on the cylinder tin where the cyl numbers are pressed, a PCI carb with a cast in brass pipe not a threaded input, a fuel pump with a vertical out put, maybe slighty different case ribbing around the oil pressure warning light area and if you're really lucky a VJ4 BR25 all mechanical advance distributor? the cylinders may have a smaller top diameter.byronmcmanus59 wrote: but its a bit different so i wanna find out about it now..
all the stuff above is bastard 40hp (60? kombi only) stuff. i'd love the bastard fuel pump if you don't want it. i picked up a rebuilt engine years ago with some bastard bits and it took years (pre net) to find out what they came from. eventually i'd love to collect enough bits to build a hotted up bastard look alike engine. if it will ever happen i don't know, but it is a fun pipe dream.
please post some pics or start a thread.