Wanted, Short axle tubes

[rossko]

As the subject says, Please. (for swing axle)

cheers

Rossko

[*did*]

hi rossko,

the tubes themselves are the exact same length, whether you are talking bug or type 3, wide 5 or 4 stud.

it is the end casting that differs in length. this is pressed onto the tube and held in place by a pin in the end casting.
wide 5 bug's have short end castings, whereas fatty's have long end castings. wide 5 type 3's have long end castings.
the length of the axle itself differs also.

you already have 'short' axle tubes.
are you after short end castings?

cheers,
steve

[rossko]

Thanks for the clarification Steve.

Yes I need the short end castings,
as i want to bring the wheels further inwards on my type III.

Thus I need beetle stuff, with the shorter end castings.

I have access to shorter axles, but they are in Adelaide, so somewhere in melburg, would be easier, but not necessary.

cheers

rossko

[muz]

come pick up that engine and i'll throw in some short axle tubes with end housings

[rossko]

come pick up that engine and i'll throw in some short axle tubes with end housings

Ok, thanks. will be in touch.

cheers muchly.