Whitewalls, Thin stripe - melburg

noonan · Post by **noonan** » Wed May 23, 2012 2:35 pm

Hey all,

Just purchased a Type 3 with ugly 14" mags on it. I want to run 15" stockies and thin weiss wall tyres.

Does anyone out there have a set of 165 thin striped whitewalls on or off stock rims that they want to sell? They dont have to be brand new, but enough to get me a RWC.

I've been quoted $250 a tyre from Antique Tyres, and that would pretty much double my spend on the entire car in one hit. Forgeddaboutit.

... if not, any suggestions as to who is best to go to for the paint-on service, or recommendations for/against flappers?

surfpig · Post by **surfpig** » Wed May 23, 2012 2:43 pm

ive got a set of red thin wall flappers, got them off ebay.

Post by **Phat Bug** » Wed May 23, 2012 3:17 pm

Great to here your back in the scene!
Show us what you got!
Still got those personalised plates?

noonan · Post by **noonan** » Wed May 23, 2012 3:48 pm

Hey Rhett (it is Rhett yeah?) thanks for the welcome!

Pic below of the new ride. Got it started last weekend, interior is near perfect with low back seats, body could do with some love, wheels are horrible. Plans are to respray it satin/matte burgundy or green with a schwarz canopy, schwarz rims, schwarz interior.

Sold the plates a few years ago, I think they're on some sort of Chev in Sunbury now.

...and thanks surfpig, i'm looking at flappers now, or I might just get them painted on for a start and see how that goes. I gutter bash a lot parallel parking in the cbd all the time, so I think i'll trash flappers in no time.

Post by **Phat Bug** » Wed May 23, 2012 4:02 pm

Yeah that's me!

New project looks like a good base, I always kick myself for mot buying those plates

Rhett

type3disease · Post by **type3disease** » Wed May 23, 2012 8:57 pm

New tyres should cost around $100 bucks each, paint on or flappers cost around thesame these days at $120-150 a set pending where you get em, I'd rwc it before you painted just to be safe, likewise should run new tyres in for a bit before you add flappers!

Have you got 15" rims now? If I were home woulda swapped you some forvte ugly 14s...

What were the plates boys? Do tell...?

You in melb I assume?

Jase · Post by **Jase** » Wed May 23, 2012 9:53 pm

Any of the paint on weiss walls where they scrub out or cut into the side wall won't get through a roady

DreamWeaver · Post by **DreamWeaver** » Thu May 24, 2012 10:52 am

Maybe cut some of these up to suit how far away from the curb you want to be, I'm thinking of doing the same

noonan · Post by **noonan** » Sat May 26, 2012 9:43 am

Cheers guys, I have a friend on the hunt for some for a '69 Corona he just bought, and we've come to the same conclusions as suggested here... schwarz tyres, run em in, add flappers or paint on (not the grind in technique though so we can still get insurance claims through in the case of an accident)

Bit shit that it's too hard to get real whitewalls any more, but tough luck I guess.

'type3disease' > I used to have the "phat" number plates on my yellow wagon. Eventually sold them off after having them sitting in my room for 3 years doing nothing, and yep, melburg based. Yarraville at the moment.

You can have the 14's if you want when I get my new tyres? I dont want them, will only sit next to my shed forever... swap em for a slab of beer?

snEEk · Post by **snEEk** » Sat May 26, 2012 10:45 am

thin whitewall tyres are still around but might be to exxy? go the atlas inserts for the best cheaper option

http://www.antiquetyres.com.au/

type3disease · Post by **type3disease** » Sat May 26, 2012 11:20 am

haha thought it might be something like that for the big fella to have been interested...

happy to supply beer for the rims - if ya cool leaving them beside your shed till I get home sometime (away for work)

look forward to seeing this wagon develop...

got any pics of the ol' yellow one?

Post by **Phat Bug** » Sat May 26, 2012 11:31 am

snEEk · Post by **snEEk** » Sat May 26, 2012 11:33 am

http://www.sumitomotyres.com/index.php? ... &Itemid=33

this what your after mate?

Megalania · Post by **Megalania** » Sat May 26, 2012 11:33 am

thats a 'unique' paint scheme on the square

noonan · Post by **noonan** » Mon May 28, 2012 8:28 am

yeah Sneek, they're what I was after, but from what I've been hearing from tyre places, Sumitomo dont make them any more, so it would only be luck if I managed to find somewhere with old(er) stock.

Plus they're fat 215s, so it would mean I dont get to slam it as much / as easily as with 165s on there.

Think i'll go blackwalls, then flappers.

And yep Megalania, that was my first car, drove it around when I was 18 and more foolish than I am now. Painted it weiss then did the top half in 100% yellow tinter so it was almost like a highlighter. Fun times.

<< My second one was the schwarz/apricot/red one from my avatar image. I spend too much time in Photoshop planning colour schemes, but it's better than just guessing what i will look like!

New one is planned to look something like this :

snEEk · Post by **snEEk** » Mon May 28, 2012 8:48 am

bummer they dont make em anymore

noonan · Post by **noonan** » Mon Jun 04, 2012 10:01 am

Hey lasty,

I'm after the thin whitewall, 3/4" or 1" stripe, and I guess 165 R15 if they do them, or 185s? Dont want to go up much wider or they look a bit stupid bulging out around the standard rim... although i'm not 100% sure of what sizes Sumitomo did/do offer.

If you can source them at all I'd be keen to get a set, do you sell tyres locally? If I cant get whitewalls I'll just be after some 165 R15s of any variety in the next week or so... let me know what you'd charge?

Cheers!