WANTED: Rear torsions, spring plates etc

muz · Post by **muz** » Sun Apr 05, 2009 3:16 pm

Chasing;

- Rear Torsion bars to suit a 1960 pan
- Spring plates to suit a 1960 pan
- Spring plate covers

Please contact Murray on 0415 392 754 or email mpigdon@aapt.net.au

Post by **hertz** » Sun Apr 05, 2009 3:32 pm

I have the trans mount plate and bolts mate. What happened to the 2 inch raise?

muz · Post by **muz** » Sun Apr 05, 2009 3:39 pm

you mean 4 inch raise

i had much sillier ideas than that involving rather powerful wasser-cooled engines, roll cage and the like...

but then after fiddling with Jocks sunroof beetle yesterday i remembered what made me love vw's in the beginning so you might say i have come full circle (not quite)

in short, it's going to be a lot tamer than i first planned.

How much you want for that mount and bolts Josh?

Post by **hertz** » Sun Apr 05, 2009 3:48 pm

I'll donate it you pussy.

muz · Post by **muz** » Sun Apr 05, 2009 3:56 pm

SCORE!

haha thanks Josh

Jase · Post by **Jase** » Sun Apr 05, 2009 6:19 pm

So do you still need a rear end cut Muz?
Or are you using the 54 Pan?

muz · Post by **muz** » Sun Apr 05, 2009 6:20 pm

Jase wrote:So do you still need a rear end cut Muz?
Or are you using the 54 Pan?

Nope and nope, still yours, i'll send you a PM

glider69 · Post by **glider69** » Tue Apr 07, 2009 5:47 pm

Have adjustable spring plates and torsion bars located in Sydney

muz · Post by **muz** » Tue Apr 07, 2009 6:01 pm

glider69 wrote:Have adjustable spring plates and torsion bars located in Sydney

You've got PM

Nafe · Post by **Nafe** » Tue Apr 07, 2009 7:34 pm

muz wrote:but then after fiddling with Jocks sunroof beetle yesterday i remembered what made me love vw's in the beginning so you might say i have come full circle (not quite)

in short, it's going to be a lot tamer than i first planned.

muz · Post by **muz** » Thu Apr 16, 2009 6:23 pm

Still chasing some rear end parts!

Have some boxes of left over Type 3 parts for trade if needed

Brick · Post by **Brick** » Thu Apr 16, 2009 6:24 pm

Got a type 3 hockey stick?

muz · Post by **muz** » Thu Apr 16, 2009 6:26 pm

Brick wrote:Got a type 3 hockey stick?

negative, just boxes of lenses, km/h speedo, door handles, ashtrays etc.

MaineBugs · Post by **MaineBugs** » Thu Apr 16, 2009 6:29 pm

what else do you need?

muz · Post by **muz** » Thu Apr 16, 2009 6:33 pm

MaineBugs wrote:what else do you need?

hmmm really just wanting to get the pan sorted so i can get it rolling on the ground this year and possibly finished, so just the rear end parts noted really.

Oh and a set of tie-rods would be handy.

muz · Post by **muz** » Thu Apr 16, 2009 6:35 pm

Donations are happily accepted

Your name will go on a "Thanks to" list written on the body

MaineBugs · Post by **MaineBugs** » Thu Apr 16, 2009 6:37 pm

muz wrote:Chasing;

- Rear Torsion bars to suit a 1960 pan
- Spring plates to suit a 1960 pan
- Spring plate covers

should have all these from a 64.

muz · Post by **muz** » Thu Apr 16, 2009 6:45 pm

MaineBugs wrote:
muz wrote:Chasing;

- Rear Torsion bars to suit a 1960 pan
- Spring plates to suit a 1960 pan
- Spring plate covers
should have all these from a 64.

Rad! I'll be PM'ing you now

Melburg Luft

WANTED: Rear torsions, spring plates etc

WANTED: Rear torsions, spring plates etc

Re: WANTED: Rear torsions, spring plates etc

Re: WANTED: Rear torsions, spring plates etc