Brake pipe and accelerator

jvm · Post by **jvm** » Sun Apr 20, 2014 4:54 pm

I'm missing the master cylinder to res pipe on my 58 - has anyone got one laying around?

Also looks like there's been some issues with the accelerator in its past as the arm that runs through the pedal assembly is bent and been welded at some point and the pedal has broke off the floor pan. Looks like the hinge is mullered and it's been welded up at some point too.
Anyone got the arm and pedal?

Thanks

Post by **jnr356** » Wed Apr 23, 2014 8:24 pm

should have them,let ya know

jvm · Post by **jvm** » Fri May 23, 2014 8:59 pm

jnr356 wrote:should have them,let ya know

Sorry, missed your reply.

I made up a new brake pipe......then found the original one in a box!

If you have the accelerator arm and pedal, still after those - I think I actually need the whole pedal assembly now as I've found the clutch cable is held on with a split pin through the arm so I think the hook must have snapped at some point.

If you have a full pedal assembly, let me know what you want your it

Thanks
Keith